العربية
Flowmeter type filling machine is a kind of filling equipment dedicated to edible oil filling machine. The filling machine adopts Siemens and other international leading brands PLC, full-color touch screen operation, real-time display of filling status, correction and adjustment to achieve a For key operation, the flowmeter uses a high-precision elliptical gear flowmeter to ensure filling accuracy. The filling capacity can be adjusted between the conventional 0.5-20L. The filling head is equipped with a vacuum suction system to prevent dripping when the filling is completed. The liquid supply is provided by the pump pressure, which greatly improves the filling speed. The first choice for installing equipment. The machine adopts anti-drip and brushed filling head, anti-high foam product filling and lifting system, positioning system to ensure bottle mouth positioning and liquid level control system. Use and operation: the automatic edible oil filling machine should check the position before starting; whether the power supply and air pressure are normal; check whether the solenoid valves and cylinders are good by manual method; whether the action is normal; whether the pumps are turned correctly; Exhausted. If abnormal conditions are found, the fault should be eliminated before production. The automatic edible oil filling machine is automatically washed, disinfected, filled, capped, and capped during production, without human interference, but the operator should closely observe the status of each part and find problems, and will automatically call the manual in time to prevent An accident happened. When the position of the chain is not correct, push the spindle out manually, and then push the chain to the normal station. The disinfectant should be added in time to prevent the pump from idling in the absence of water and burning out the seal. After the production of the automatic edible oil filling machine is finished, the residual liquid in the pipeline should be released, the gas path and water source should be cut off, and the power supply should be turned off. Routine maintenance: We must regularly check some machine parts and carry out regular inspections. The inspection parts are: worm gears, worms, bolts on the lubricating block, bearings and other moving parts, to see if these parts rotate flexibly and wear out, and if defects are found, they should be repaired in time and not used forcibly.
The automatic edible oil filling machine should be used in a dry and clean room. Try not to use it in places where the atmosphere contains acids and other corrosive gases to the body. The automatic edible oil filling machine should be cleaned after use, and then installed, ready for the next use. If you do not use the packaging machine equipment for a long time, you must clean the whole body of the automatic edible oil filling machine. The smooth surface of the machine parts is coated with anti-rust oil and covered with a cloth. If you have not used the device for a long time, you must check whether all parts are normal before using it.
