العربية
1. The labeling machine must add labels to ensure that the labels are aligned. The first label must be 0.1 ~ 0.2mm between the guide forks and the fingers must press the label evenly on the side strip. After the fingers are opened, the roller sponge needs to press the label on the bottle. Finally, to ensure that the label will not be skewed, the vertical and horizontal positioning plate needs to be adjusted.
2. Make sure that the label is properly pressed when adding the label. If the pressure is too large, the label will be misplaced during the labeling process, and acceleration of the label hook will also cause some wear. Second, the labeling machine and flat labeling machine work out of the label detection, take the automatic flat labeling machine, for example, when the article reaches the labeling position through the conveyor belt, it is necessary to ensure that the label brush presses the label evenly and smoothly. In the process, if the pressure is insufficient or too high, the labeling position will be skewed, so the operator needs to pay attention to this. When the labeling skew is found, the pressure of the marking brush should be adjusted.
